OKULEN® 2000 - F-Ex - FN9990
OKULEN® OK 2000 F-Ex -FN9990 is a virgin UHMW-PE polymer with advanced flame retardant properties. This material is halogen free! Even with the additive used to extinguish the flame, great gliding properties and good wear resistance are still achieved through using the highest polymer possible. With a good impact strength, it was designed for such applications in conveyor systems used in the mining field.
The flame retardant classification is measured to UL (Underwriters Laboratories) standard using the method UL94 = V0, vertical flame test and MSHA – Mining industry – USA.
Properties:
• Flame retardant
• halogen free
• conductive properties
• low friction for great wear properties
• UV-stabilized
Tested against following flammability standards and corresponding rating:
• FMVSS 302 = does not burn
• UL 94 = V-0
• MSHA (USA-Mining) = IC-266 (min. thickness: 12,7 mm)
Colour:
black-silver FN9990
Range of applications:
• Off-road transportation
• Construction industry
• Mechanical engineering
• Mining industry
• Harbours / Docks
|
Properties
|
Method
|
Unit
|
OKULEN® 2000 - F-Ex - FN9990
|
|---|---|---|---|
| Physical properties | |||
| Molecular-weight | k.a. | Mio. g/mol. | ~ 9.0 |
| Density | DINENISO 1183-1 (04/2013) ASTM D792 |
g/cm³ | > 1.020 |
| Notched impact strength | DINENISO 11542-2 (01/2010) | kJ/m² | > 50 |
| Abrasion-Index (Sand-Slurry) | DINENISO 15527 (05/2013) | 110 - 140 | |
| Tensile strength (1B - 50mm/Min.) | DINENISO 527-2 (06/2012) ASTM D 638 (2010) |
N/mm² | > 17 |
| Breaking strength (1B - 50mm/Min.) | DINENISO 527-2 (06/2012) ASTM D 638 (2010) |
N/mm² | --- |
| Elongation (Break / 1B - 50mm/Min.) | DINENISO 527-2 (06/2012) ASTM D 638 (2010) |
% | > 50 |
| Tensile-E-modulus (1B - 1mm/Min.) | DINENISO 527-2 (06/2012) ASTM D 638 (2010) |
N/mm² | > 1000 |
| Flexural modulus | ISO 178 (09/2013) ASTM D 790 (2010) |
N/mm² | --- |
| Static Friction | ASTM D 1894 (2011) | ~ 0,15 | |
| Dynamic Friction | ASTM D 1894 (2011) | ~ 0,08 | |
| Shore-D-Hardness, 3 sec. value 6 mm plate | DINENISO 868 (10/2003) | D | 61 - 64 |
| Ball indentation hardness | DINENISO 2039 | N/mm² | ~ 35 |
| Water absorption | DINENISO 62 (05/2008) | % | < 1,5 |
| Thermal properties | |||
| Melting Point (DSC) | DINENISO 11357-1 (03/2010) | °C | 135 - 137 |
| Thermal Conductivity | Wire method | W/m*K | --- |
| Max. operation temperature | Literature | °C | ~ 80 |
| Coefficient of thermal expansion (23 - 80°C) | ISO 11359 | mm/mm °C | ~ 0.00015 - 0.00020 |
| Electrical properties | |||
| Volume resistifity | IEC 60093 (12/1993) | Ohm*cm | < 1.0E6 |
| Surface resistifity | IEC 60093 (12/1993) | Ohm | < 1.0E6 |
| ATEX-Directive - TÜV approved! | ATEX-Directive | --- | |
| ESD-D | --- | Ohm | --- |
| Burning properties | |||
| Fire resistance (Self-classification) | DIN 4102 | Klasse | --- |
| Fire resistance (Self-classification) | UL94 | Klasse | VO |
| Physiological properties | |||
| Food compliant | --- |
