DE |  EN
 
 

OKULEN® 2000 - GB - natural - FN0004

OKULEN® 2000 - GB is enhanced with a glass filler which gives the UHMW-PE (~ 9 mio. g/mol) a higher abrasion resistance than standard material. It offers excellent impact strength for tough applications.

Properties:

• extremely wear resistant
• good sliding properties
• good chemical resistance
• low maintenance
• longer life time over standard UHMW-PE
• EU1935/2004 - conform
• EU10/2011 - conform

food-grade

Colour:

natural FN0004

Range of applications:

• Machine construction
• Conveyor industry
• Agriculture, farming equipment
• Waste water and filtration systems
• Paper industry (wet section of a paper machine)


Characteristics and standard values
Properties
Method
Unit
OKULEN® 2000 - GB - natural - FN0004
Physical properties      
 Molecular-weight k.a. Mio. g/mol. ~ 9.0
 Density DINENISO 1183-1 (04/2013)
ASTM D792
g/cm³ 0.95
 Notched impact strength DINENISO 11542-2 (01/2010) kJ/m² > 120
 Abrasion-Index (Sand-Slurry) DINENISO 15527 (05/2013) 75
 Tensile strength (1B - 50mm/Min.) DINENISO 527-2 (06/2012)
ASTM D 638 (2010)
N/mm² > 18
 Breaking strength (1B - 50mm/Min.) DINENISO 527-2 (06/2012)
ASTM D 638 (2010)
N/mm² > 28
 Elongation (Break / 1B - 50mm/Min.) DINENISO 527-2 (06/2012)
ASTM D 638 (2010)
% > 250
 Tensile-E-modulus (1B - 1mm/Min.) DINENISO 527-2 (06/2012)
ASTM D 638 (2010)
N/mm² > 680
 Flexural modulus ISO 178 (09/2013)
ASTM D 790 (2010)
N/mm² ---
 Static Friction ASTM D 1894 (2011) > 0.14
 Dynamic Friction ASTM D 1894 (2011) > 0.09
 Shore-D-Hardness, 3 sec. value 6 mm plate DINENISO 868 (10/2003) D 65 - 70
 Ball indentation hardness DINENISO 2039 N/mm² ~ 38
 Water absorption DINENISO 62 (05/2008) % < 0.1
Thermal properties      
 Melting Point (DSC) DINENISO 11357-1 (03/2010) °C 135 - 137
 Thermal Conductivity Wire method W/m*K ~ 0.41
 Max. operation temperature Literature °C ~ 80
 Coefficient of thermal expansion (23 - 80°C) ISO 11359 mm/mm °C ~ 0.00015 - 0.00020
Electrical properties      
 Volume resistifity IEC 60093 (12/1993) Ohm*cm > 1.0E14
 Surface resistifity IEC 60093 (12/1993) Ohm > 1.0E13
 ATEX-Directive - TÜV approved! ATEX-Directive ---
 ESD-D --- Ohm ---
Burning properties      
 Fire resistance (Self-classification) DIN 4102 Klasse B2
 Fire resistance (Self-classification) UL94 Klasse HB
Physiological properties      
 Food compliant EU
 
 

Copyright © 2018 OKULEN® all rights reserved.